Practical demonstrations of the film infusion up to the printing process of Gerlingen, March 28, 2011. Fibre-reinforced plastics (FRP) can be just as versatile as use. Long + Ritter GmbH, specialist for fiber composites, demonstrates the application possibilities of the Hannover Messe 2011 in practice. From 4th to 8th April Lange + Knight gives insight in the RTM process in the solution area in Hall 6 at stand 26 A live. The procedures summarized under this heading range from the film infusion through the RTM – light to the printing RTM process. The practice shows, where Lange + Knight performs with company Wolfsangel, initiated by the EURO-RTM group, a working group of the Industrial Association of reinforced plastics (AVK).
Daily demonstrations the demonstrations take place daily area at 13: 00 in the solution, they last about 50 minutes. This can spectators watch the production of two components. You get to look the way the professionals while working on the finger and to ask the respective action steps, processes, machines, or materials. “Aims, production processes of selection of materials, to make tangible and practical tangible to the finished component”, says Riki Rosson, Managing Director of long + Ritter GmbH. For more information about Lange + Knight here: content/index.php press contact Gerhard Baumann GmbH & co. KG Schorndorfer Strasse 42 71638 Ludwigsburg telephone: 07141-688 96-3 fax: 07141-688 96-59 E-mail:
Working together under the title”the customer days 2011 of gds AG is held from beginning until mid March. Sassenberg, March 24, 2011: The existing customers of the full service provider for the technical writers were invited to discuss with the speakers and to participate in the future of the editorial system docuglobe. Venues were Congress Centers in Zurich, Stuttgart and Sassenberg. The contributions of the speakers were diverse, practical and tailored to the needs of the customers. Henning m locomotive Sales Manager and product manager Christian Paul opened the series of presentations with insights into the changes of docuglobe 7 and presented the project and module of the content management system. In a further contribution Christian Paul entered the pros and cons, which brings an introduction by MS Word 2010 for a company.
Max Brandle, Managing Director of gds Switzerland GmbH, dealt the in his lectures with the handling of CAD data for the technical documentation, as well as with the most important aspects Machinery directive. “The no longer quite new machinery directive ensures the technical documentation in many companies still uncertainty. “So we wanted to address this issue once again and the key questions and the substantive requirements for technical documentation clarify for all time jointly”, so Banerjee. In its final views, the three speakers in addition to the further development of the new gds Translation Portal were also a simplified processing of support cases in Vista. During the talks, as well as to the end of the event resulted in interesting and insightful conversations between the speakers and the many participants who were enthusiastic and engaged.
“Such cooperation between customers, support gds and gds product management is very useful and productive. The local service customers and docuglobe users contribute here with their experiences, questions, or suggestions much to the development of our services and products”, explains Ulrich Pelster, CEO of gds AG. More information on gds AG. 17. D-48336 Sassenberg Tel. + 49 (0) 2583 301-3000 Fax + 49 (0) 2583 301-3300 via global document solutions: clients of gds AG use a variety of solutions for technical documentation. As a software developer, the environment sells gds docuglobe, who works with MS Word as editor. Based on the principle of modularization, docuglobe demonstrably reduces the costs for product supporting documents by 30-70%. With the terminology tool docuterm gds offers a solution to ensure consistent naming. In the service sector documate customers take advantage of complex services: translation, technical writing and graphics. By the outsourcing of small documentation projects to full outsourcing of technical documentation. Last but not least, customers reduce their liability risk in this sensitive area by documate. The offer is rounded off by docuconsult, the Department of analysis, advice, training, workshops and seminars, each with a focus on current Developments and trends in the technical documentation. Editorial Contacts: gds AG Robert-Linnemann-str. 17 D-48336 Sassen mountain Dr. Yvonne Rittgeroth phone: + 49 (0) 2583 301-3018 PR Agency, good news! GmbH Nicole Korber of Koobrzeg str. 36 D-23617 Stockelsdorf phone: + 49 (0) 451 88199-12
Almost limitless possibilities of span thanks to a modular building Kit from different baking / / cleaning and reproducible clamping forces up to 40 kN in the modern production of workpiece effectiveness is one of the most important keys to success is minimal. Machines to cope with more than just a work step in minimal upgrading courses and processes. Dual high pressure clamping system as the model ‘DUO’ the ALLMATIC-Jakob spannsysteme GmbH are designed exactly for such applications. With the DUO plus 125 companies from Germany in the Allgau presented their success system. The high pressure clamping system combines the advantages of its predecessor with some helpful and practical innovations: DUO plus 125 sets on ALLMATICs proven ‘grip system’. It is both a span of raw parts, as well as already processed workpieces of different geometries possible.
Customers appreciate ALLMATIC a competent service partner and manufacturer of precision clamping systems of the highest quality. International experts include for Workpiece clamping to the most important producers of clamping devices at all today. Machine Vice with centric voltage up to complex clamping solutions for flexible machining centres, it offers an optimal solution for every area of application. When the T-Rex models, TITAN, and CENTRO GRIPP ALLMATIC has used the innovative clamping system. It is a modular system of interchangeable jaws, which guarantee maximum precision when clamping thanks to optimum adaptation to the work piece. Always perfect tense:, Workpieces, especially represent a greater challenge with complex geometries when editing. With conventional clamping JAWS can be difficult fix circular moldings or unmachined workpieces. Is this problem of the past thanks to DUO plus 125.
The diverse range of clamps for the system ranges from step and carrier jaws, to a universal Grippset up to soft essays. Thus the high-pressure q.r. each to be processed flexibly on the nature Customize part. The workpiece is held always tight in the handle, which allows a production at the highest level.